Automatic
lines are available in a circular, rotative-arm design with programmable
time cycle. These machines vary from about 8'-36' in diameter, with power
supplies from 100 amps to 7,000 amps. The equipment is designed for top
quality finishes in high production volume. The design includes
the ventilation hood and fan for the tanks, less ductwork. Installation
and waste treatment equipment are additional.
Custom-built, automatic machines are also available for rack processing,
using typical straight-line, or return-type, programmable hoists.
| |
|
|
| |
This rotative arm machine is automated to produce about 10,000 small
pieces per shift. The control panel operates all machine parameters
and can be programmed as required for other work. The operator runs
the machine from a single station, loading and unloading racks as
they return after completing the process cycl e. The machine is
about 10 feet in diameter x 12 feet high. |
|
| |
|
|
| |
Above, a rotative arm machine on the left is programmed to electropolish
about 5,000 small medical parts per shift. The machine has nine
process stations and two 100-amp rectifiers. The machine has a diameter
of about 6 feet and an overall height of about 10 feet. Al l operations
are automatically performed by the PLC located in the operator control
panel. |
|
|
